Re: Grab rail fixings
Posted: Mon Jul 17, 2023 5:23 pm
Fair point Malcolm, not half as much fun though :-)
Having looked at taking the cupboard doors of as being the "right" answer I concluded they were rather well stuck to be disturbed so took the option of a new hole in the top of the cupboard. 6mm auger bit down the bolt hole from the top for a pilot hole then there was just enough space with a hole saw on an improvised extension to cut on not too bad an angle. Not visible in normal use and easy access to the nut.
Having looked at taking the cupboard doors of as being the "right" answer I concluded they were rather well stuck to be disturbed so took the option of a new hole in the top of the cupboard. 6mm auger bit down the bolt hole from the top for a pilot hole then there was just enough space with a hole saw on an improvised extension to cut on not too bad an angle. Not visible in normal use and easy access to the nut.