Cape Cutter 19 Association Forum

by **Ru88ell** » Wed Jun 20, 2012 6:27 pm

Does anyone have to hand the angle of the transom from vertical?

by **David Peck** » Wed Jun 20, 2012 7:47 pm

Measuring it from a grp construction drawing it is 18.3 degrees from the vertical assuming the waterline is exactly horizontal. In reality of course most CC19's float slightly higher at the bows relative to their theoreretical waterline.

Regards
David Peck CC94

by **Dennis** » Wed Jun 20, 2012 8:37 pm

What are you up to now Russell? :confused:

by **Ru88ell** » Wed Jun 20, 2012 9:53 pm

Dennis wrote:What are you up to now Russell?

As a prolific solo rigger and de-rigger I'm found wanting for something to lay the mast on when I'm threading the top tabernacle bolt. The tiller isn't good as the mast can slip off and cause enough twist to take the bolt holes out of alignment. I'm thinking of making a wooden contraption which sits on the transom, straddles the tiller, and is of sufficient height and width so that I can lay the mast on it for rig/de-rig and transportation. It could also be used to fit the light board to, as I'm sure it should be at the back of the boat and not a metre in front of it as most seem to be.

I'll make it from thin ply and 2x1, but I need to know that angle before I start my prototype. Once sorted my dad will knock them our for anyone who wants one.

And thanks, David, for being so quick!

by **Dennis** » Thu Jun 21, 2012 9:02 am

Hello Russell

Have you seen Seasickwhale's "boom crutch" in his album: http://www.capecutter19.org/forum/album.php?albumid=16

Incidently Seasickwhale has five albums, none of which are visible via the community links drop down menu!!! Possibly one of your first tasks as webmaster:rolleyes:

I use a similar arrangement on Mary Ann and it works well.

by **Ru88ell** » Thu Jun 21, 2012 9:16 am

I've seen it and have one not too dissimilar, but it's not stable enough for what I want. All will become clear.

by **David Peck** » Thu Jun 21, 2012 10:26 am

Hi Russell,

I will shortly put a picture of my mast support device on the website. It caters also for towing with the boom and gaff resting on it. It is stable and allows for the 18 degrees transom angle.

Regards
David Peck CC94

by **Ru88ell** » Tue Aug 14, 2012 10:16 pm

Dennis wrote:What are you up to now Russell?

Photos in my album.

It worked a treat - it's lightweight and easily fits inside the car. Travelling was very safe, and rigging was the best ever, as it supports the mast centrally, and then the boom too.

by **Dennis** » Wed Aug 15, 2012 10:38 am

Hello Russell

It looks good.

It also reminds me of the boom crutch fitted to my Winkle Brig. It was permanently attached but could be raised or lowered, it was a most useful feature.

Mmmm! food for thought!

See attachments:

Cape Cutter 19 Association Forum

Transome angle

Transome angle

Transom Angle

Transom Angle

Who is online