Fitting Out

Installation of instruments and electrics in the Cape Cutter 19

Fitting Out

Postby Dennis » Thu Apr 30, 2009 5:54 pm

Hello all.

For anyone that is interested I have just posted some photos in album "Mary Ann Modifications" showing instruments, fuse panel(s) etc.

Cheers

Dennis
User avatar
Dennis
CC19 Association Member
 
Posts: 1013
Joined: Fri Mar 27, 2009 6:29 pm
Location: Northumberland

Fixed VHF

Postby Simon Head » Fri May 01, 2009 3:38 pm

Hi Dennis

I like your fixed VHF installation:)- how did you take the arial out though the deck- and how did you get it up the mast (and what arial did you use?)

Regards

Simon Head
Simon Head
CC19 Association Member
 
Posts: 170
Joined: Thu Mar 26, 2009 4:16 pm
Location: Knutsford Cheshire

Re: Fitting Out

Postby Adrian Langford » Tue Mar 17, 2015 8:35 pm

I'm wondering about moving our panel. Meisje (was Nemo) came to us with the electrical panel on the bulkhead between the cabin and cockpit, just below the cabin ceiling. It's not fixed in very solidly and intrudes quite a way into the cabin because the fixed VHF is mounted here.

My plan is to fit a new panel further outward towards the hull, i.e. spanning the 'dead' space above the pilot berth. This panel could possibly be fitted flush with the boat's bulkhead, and would not protrude so much into the cabin.

Our batteries are currently between the pilot berths, so the distance to the panel is not too great.

Has anyone done this or got any suggestions?

Cheers,

Adrian, Meisje, No. 63
Adrian Langford
CC19 Association Member
 
Posts: 26
Joined: Sun May 18, 2014 8:33 am


Return to Instruments and Electrics

Who is online

Users browsing this forum: No registered users and 1 guest

cron